This article contains the Device Setups for the Tyro V2 integration with Bepoz Version 4.3.0.0.
Tyro Integration allows Bepoz to communicate directly with Tyro EFTPOS terminals. Each Till that will have integrated Tyro EFTPOS will need to have the relevant TYRO device added to that till through Bepoz BackOffice.
Each Till then also requires the installation of the Tyro program TTA.exe.
This device establishes the pairing between the Tyro CUBE terminal and the Till.
Following is a link to the Tyro Installation Guide - TTA-Installation-Guide-2014-04-15.pdf
Following is the link to download the Tyro Terminal Adaptor - integrationdownloads.tyro.com/TyroTerminalAdapter
Prerequisites- To manage Devices & Interfaces, the following Operator Privileges will need to be enabled
- Operator Maintenance 'General' Tab
- System Setup: "Maintain Venue, Stores & Tills" Flag
- System Setup: "Access Venue, Stores & Tills" Flag
Network Connectivity
Tyro Pinpads <-> SmartController
- TCP 11001 (is configurable if it conflicts)
Tyro Pinpads/Bepoz Tills <-> Tyro Server
- TCP 80, TCP 443, TCP 10433
Tyro Server IP Address Range
- 58.181.64.0 - 58.181.95.255
- i.e. 58.181.64.0/19
- i.e. 58.181.64.0, 255.255.224.0
Tyro Connectivity Test
https://www.tyro.com/selftest/
Device Setup
| External DLL Name | Eftposanz.Dll |
| Class Name | TYRO V2 |
Device Options
| Enable Pre-Auths |
|
| Use Embedded Receipts |
|