5 | Linkly TCPIP (v4.6+)
This article covers TCPIP settings for PC-EFTPOS Configuration. PC-EFTPOS TCPIP is the 64bit support for PC-EFTPOS. PC-EFTPOS is a Windows-based system that will provide all the user screens, and communicate with the EFTPOS terminals. This system allows EFTPOS units to share one phone line or leased line. PC-EFTPOS v 4.8.1.0 / (Linkly In-store software v5.6.5) is the recommended version to use with Bepoz. PC EFTPOS Download This Interface is only supported by Windows Tills.
This article covers TCPIP settings for PC-EFTPOS Configuration.
PC-EFTPOS TCPIP is the 64bit support for PC-EFTPOS.
PC-EFTPOS is a Windows-based system that will provide all the user screens, and communicate with the EFTPOS terminals. This system allows EFTPOS units to share one phone line or leased line. PC-EFTPOS v 4.8.1.0 / (Linkly In-store software v5.6.5) is the recommended version to use with Bepoz.
This Interface is only supported by Windows Tills.
Prerequisites- Minimum Bepoz version of 4.6.2.6 and above
- To setup PC-EFTPOS within BackOffice, the applicable Operator Privileges will need to be enabled
- Operator Maintenance 'General' Tab
- General Settings: "Use BackOffice" Flag
- System Setup: "Access Venue, Stores & Tills" Flag
- System Setup: "Maintain Venue, Stores & Tills" Flag
- Operator must firstly install the PC-EFTPOS software on each Windows POS that needs to communicate with an EFTPOS terminal
- See the Standard PC-EFTPOS documentation for configuring the PC-EFTPOS software and EFTPOS terminals
- PC EFTPOS Documents
PC-EFTPOS BackOffice Device Setup
- When the POS Terminal is running a 64Bit OS then this interface MUST be used; NOT the ActiveX option
- Go to the System Setup tab from the side menu and select 'Venue, Stores & Till'
- Select the desired Till within the desired Store within the desired Venue where the PC-EFTPOS device will be connected to
- Click on 'Add New Device' and a Device and Interfaces Maintenance screen pops up, fill in with the following details:
- Device Name: As per desired
- Device Type: Eftpos
- External DLL Name: Eftposanz.Dll(4.6) | Eftposnet45.Dll(4.7)
- Class Name: PC_EFTPOS_TCPIP(4.6) | Linkly TCPIP(4.7)
- Device Options:
- Use Pre-Auths:
- ON: When the flag is enabled, the Pre-auth on table transactions are allowed
- OFF: When the flag is disabled, the Pre-auth on table transaction are not allowed
- Enable Tipping:
- ON: When the flag is enabled, this will allow tipping through the EFTPOS device
- OFF: When the flag is enabled, this will not allow tipping through the EFTPOS device
- Auto Restart Services:
- ON: When the flag is enabled, and PC-EPTFOS installation directory is not empty, POS will run PC-EFTPOS services and Client UI when they are not running
- OFF: When the flag is disabled, and PC-EPTFOS installation directory is not empty, POS will not run PC-EFTPOS services and Client UI
- Allow Operator Restart:
- ON: When the flag is enabled, then the Operator will have the option to restart the service when the timeout period has elapsed
- OFF: When the flag is disabled, then the Operator will not have the option to restart the service when the timeout period has elapsed
- Dynamic Handling Fee: (Note: Only available from v4.7.2)
- ON: When the flag is enabled, then EFTPOS terminal dynamic handling fee are accepted
- OFF: When the flag is disabled, then EFTPOS terminal dynamic handling fee are not accepted
- Signature Line:1
- ON: When the flag is enabled, the signature line will be included in the Merchant receipt
- OFF: When the flag is disabled, the signature line will not be included in the Merchant receipt
- PC-EFTPOS Install Dir: The folder within the system where the PC-EFTPOS has been installed
- Terminal Application Type:
- EFTPOS: This option will use the PC-EFTPOS print settings
- Agency: This option will override the PC-EFTPOS settings and use the Bepoz Application settings
- AlbertCBA:
- Print Customer Receipt: This option is to print the customer receipts. The operator can select any one option from the dropdown list
- DoNotPrint: When this option is selected, the customer receipt is not printed
- PrintAutomatically: When this option is selected, the customer receipt is automatically printed out
- AskToPrint: When this option is selected, the operator gets a prompt asking if they want to print the customer receipt or not. Based on the prompt options, the operator can either opt to print or reject not to print
- TCPIP Settings:
- IP Address: IP Address of the PC-EFTPOS Client; if the client is installed on the local machine then you could set the loopback IP address (eg 127.0.0.1)
- TCP Port: Port Number of the PC-EFTPOS Client; by default the port number should be 2011
- Other Settings:
- TimeOut: TimeOut time set in seconds

- Click OK to save the Device
- Repeat these steps for all required Tills
Miscellaneous EFTPOS Functions
- In function maps there is an “EFTPOS Method” function. This allows for EFTPOS interface specific functions to be performed from within the Tills
- For PC-EFTPOS only the Button Item field is used. Below are the functions that can be accessed from a Till Override Button
- You will need to setup a new panel on the function map if you are going to set multiple EFTPOS functions
User Selection = 0 | Displays all functions to select from |
ControlPanel = 1 | Displays the PC EFTPOS ControlPanel |
SetupPinPad = 2 | Displays the PC EFTPOS SetupPinPad |
ReceiptPrint = 3 | Displays the PC EFTPOS ReceiptPrint |
DisplaySettlement = 4 | Displays the PC EFTPOS DisplaySettlement |
DisplayStatus = 5 | Displays the PC EFTPOS DisplayStatus |
JournalViewer = 6 | Displays the PC EFTPOS JournalViewer |
Logon = 7 | Displays the PC EFTPOS Logon |
SelfTest = 8 | Displays the PC EFTPOS SelfTest |