Printers
      Back to home
      1. INTERNAL - Bepoz Help Guides
      2. Hardware
      3. Printers

      Bixolon M270 - Enable beeping after print

      Overview

      Instructions:

      • Turn off the printer

      • Open the Dip Switch cover

      • Set 1 and 2 on SW/1 to On. SW/1 is the switch that is nearest to the serial port/cable. 

      • Go to the Printer Definitions in Back Office

      • Locate the Gravity BTP-M270

      • Look for the FullCutCode and PartCutCode columns and add "1B07" at the end of the number. 

      • Close and do a test print. You may need to restart the Smart Print on the till.